VEGA
07.11.2014

PLICSLED – The new switching status display module for point level sensors 

PLICSLED – The new switching status display module for point level sensors

The display module PLICSLED can be ordered directly with the sensor or, alternatively, as a separate unit for retrofitting.

With the new display module PLICSLED, the switching status of a sensor can be read from afar, even in strong sunlight. The module is compatible with all sensors of the plics® family with relay output: VEGASWING series 60, VEGAVIB series 60, VEGAWAVE series 60, VEGACAP series 60 and VEGAMIP series 60.

Since external wiring is unnecessary, the time needed for installation is reduced to a minimum. Power is supplied via the relay electronics. The second relay output is used to control the switching status display. Depending on the module version, the switching status is displayed in the colour combination red-green or yellow-green.
PLICSLED is installed directly inside the plics® sensor housing, which gives it a high degree of protection from dust and water ingress.