VEGA

Point level measurement with conductive level switches 

Conductive sensors are used in conductive liquids. The probe detects the product resistance when immersed. The very small alternating current that then flows is measured by the integrated electronics and converted into a corresponding switching signal. The switching signal is determined by the mounting position or the length of the respective probe. Applications can be found in all areas of industrial measurement technology, e.g. in overflow protection, pump control or dry run protection.

The advantages

Conductive level sensors provide reliable, maintenance-free point level detection thanks to their simple and robust construction.

Select a suitable sensor using the technical data.

VEGAKON 61

VEGAKON 61
Version
partly insulated compact level switch
Process fitting
thread G1, 1 NPT
cone DN 25
Materials
316L, PTFE
Process temperature
-40 +150 C
Process pressure
-1 +25 bar
(-100 +2500 kPa)

VEGAKON 66

VEGAKON 66
Version
compact level switch
Probe length
up to 4 m
Process fitting
thread G1
Material
PPN
Process temperature
-40  +100 C
Process pressure
-1  +6 bar
(-100  +600 kPa)

EL 1

EL 1
Version
fully insulated rod
Probe length
up to 4 m
Process fitting
thread G
Materials
316 Ti, PTFE
Process temperature
-50  +130 C
Process pressure
-1  +63 bar
(-100  +6300 kPa)

EL 3

EL 3
Version
partly insulated rod
Probe length
up to 4 m
Process fitting
thread G1
Materials
316Ti, PTFE
Process temperature
-50  +130 C
Process pressure
-1  +63 bar
(-100  +6300 kPa)

EL 4

EL 4
Version
partly insulated rod
Probe length
up to 4 m
Process fitting
thread G1
Materials
316Ti, PP
Process temperature
-20  +100 C
Process pressure
-1  +6 bar
(-100  +600 kPa)

EL 6

EL 6
Version
partly insulated cable
Probe length
up to 50 m
Process fitting
thread G1
Materials
316Ti, PP/FEP
Process temperature
-20  +100 C
Process pressure
-1 +6 bar
(-100 +600 kPa)

EL 8

EL 8
Version
partly insulated rod
Probe length
up to 1 m
Process fitting
thread G
Materials
316Ti, PE
Process temperature
-10 +60 C
Process pressure
-1  +6 bar
(-100  +600 kPa)

VEGATOR 256C

VEGATOR 256C
Sensor input
1 conductive electrode
1 x Min./Max.
Relay output
1 x spdt
Protection
IP 20 

VEGATOR 632

VEGATOR 632
Sensor input
2 x conductive probe 
Relay output
2 x spdt
Protection
IP 20